To connect to the debug port on the Developer Kit, any serial console interface can be used. The debug port will be the one in the last position, usually /dev/ttyUSB3. This will only work if the board is connected to the power supply, but will work even if it is not powered up. But the issue is I'm not able to enter anything. I used minicom and it works well like I'm able to see the output of my hardware. I've used a USB to serial cable, and the serial cable is connected to the hardware and the USB is connected to the USB port of my desktop.
#Minicom serial port how to#
They will be assigned devices /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2 and /dev/ttyUSB3, assuming no other /dev/ttyUSBn existed before the connection. This guide will demonstrate: How to Program the Arduberry using Arduino IDE How to Access the serial port using minicom How to Access the Serial data from. I'm trying to communicate with my hardware board from a Ubuntu installed PC. The exact location can be seen at the Front view of NVIDIA Jetson Xavier developer kit.Ĭonnecting this port to a PC running Ubuntu using a micro-USB cable will register four serial ports in the PC. The debug port location can be found on one of the sides of the board. The NVIDIA Jetson carrier provides a USB connector for debugging using the serial console. Parsing a Tensorflow model for TensorRT.Using TensorRT integrated with Tensorflow.Previous: In Board/Getting into the Board Please come back soon to read the completed information on Ridgerun's support for this platform. Part of the NVIDIA Xavier series of RidgeRun documentation is currently under development. We have most of the Xavier documentation in place - enjoy.